VS30 - 34105072

Technical Data..... Voltage: 230v, 50/60Hz Motor: 0,11Kw Roller width: 30mm Roller Diametre: 76mm Axles/Rollers: 3 Supension on rollers: 16mm Max working height: 50mm Feed speed forward/reverce 2-12m/min Weight: 10,5Kg

£341.00

view details

Belt sander LB31EA - LB3

Powerful belt sander for perfect surface finish. The large sanding surface increases efficiency and guarantees an even finish without using a sanding frame.
Equipped with a dust container. Delivery in a cardboard box including dust container.

£365.00

view details

DHM 630P - Holzmann

• electrical table height adjustment with 2 lifting speeds
• step less and electronically feeding speed standard
• table height hand wheel for fine adjustment
• digital read out of table position indicated at the front panel
• two individual adjustable and driven support rollers in the thicknessing table
• 4 times precision guided thicknessing table• grounded thicknessing table lowers friction
• structured pressure roll allows transportation of work pieces with different thickness (up to 5mm difference)
• very powerful chain drive of feeding unit
• precision bedded cutter block allows perfect thicknessing results
• dust collector plug: 160mm
• Max. chip removal up to 8mm, feeding speeds: 5-21m/min (step less)
• noise insulated housing of the cutter block

view details

Edgebander - SCM K203

Compact and versatile automatic edge banders Max edge thickness: 5 mm (8 mm opt.) Compact for maximum efficiency in small spaces. High precision of end cutting equipped with 2 independent motors with sliding on prismatic guideways. Production with high versatility because the hot melt gluing system allows the use of all types of edges. Efficient processing thanks to the minimum distance between two panels. Technical Features Minimum maintenance, maximum cleaning by means of the device for the automatic recovery of unused glue Perfect workpiece clamping with wheels mounted on bearings and feed track with sliding on one round and one flat guide Operating units with HIGH-FREQUENCY MOTORS Automatic positioning of all operating groups according to the panel thickness Automatic loading of edge strips Technical Features strip edging thickness mm 0,4 / 5 (8 mm opt.) roll edging thickness mm 0,4 / 3 panel thickness mm 10 / 55 feed speed m/min 10,5 space between one panel and the next mm 500 tool speed rpm 12.000

view details

PVC Edging - Proadec PVC

0.4mm Pvc available in any width and any colour we can match any board from any manufacture. For a copy of our swatches call our sales team

view details

VS33 - 34106000

Technical Data..... Voltage: 400v, 50/60Hz Motor: 0,6Kw Roller width: 50mm Roller Diametre: 100mm Axles/Rollers: 3 Supension on rollers: 18mm Max working height: 150mm Feed speed forward/reverce 2-33 m/min Weight: 10,5Kg

£527.00

view details

VS38 - 34106035

Technical Data..... Voltage: 400v, 50/60Hz Motor: 0,75Kw Roller width: 60mm Roller Diametre: 120x60mm Axles/Rollers: 3 Supension on rollers: 20mm Max working height: 220mm Feed speed forward/reverce 2-33m/min Horozontal bar length: 1050mm Weight: 70,75Kg

£757.00

view details

GR120P - 29000009

Equipped with a base 442 mm length and perfectly balanced. It is specially designed for planning doors or other wooden pieces besides the usual applications for a professional planer. Equipped with several electronic devices for more safety and comfort. Ergonomic design for hand- or left- handed people without distinction.

£321.00

view details

CE24E - 29000007

Designed and manufactured for heavy work with the highest standards of quality. The single piece housing is made entirely of aluminium. It is therefore a very sturdy and robust tool which is also light and easy to handle. A power rating of 1,200 W allows it to perform the heaviest and most demanding types of work. It is provided with replaceable hard metal twin-use knives.

£360.00

view details

CE20J - 21000001

Designed and manufactured for heavy work with the highest standards of quality. The single piece housing is made entirely of aluminium. It is therefore a very sturdy and robust tool which is also light and easy to handle. A power rating of 1,200 W allows it to perform the heaviest and most demanding types of work. It is provided with replaceable hard metal twin-use knives.

£275.00

view details

EH80 - 29000321

Its power rating (700 W) combined with its lightness make this model ideal for work both within and away from the shop. Easy to handle and carry. Its specially treated sliding base is designed to achieve perfect planing. It is provided with replaceable twin-use hard metal knives. Therefore it does not require adjustments when knives are changed.

£190.00

view details

LB31E - 29104123

Top performance belt sander for levelling and rough work.

£355.00

view details

LB31EA - 29104121

Top performance belt sander for levelling and rough work. Equipped with dust collector connection.

view details

AF11 - 29104122

This is a high performance belt sander for roughing and flushing. Its large sanding surface increases productivity and ensures the obtention of a scratchless finish. Its three-phase, 900 W motor allows it to perform heavy work without maintenance problems. It is provided with tungsten carbide stopping dogs to prevent housing wear caused by belt operation. Equipped with a dust collector connection to allow the operator to work comfortably and cleanly.

£385.00

view details

LR46L - 23101106

High-performance orbital sander for polishing and finishing. Powerful and well-balanced, it allows the user to carry out high-quality work without the need for touching up. The PUR plate which comes as standard is virtually unbreakable. Mobile base for use with velcro sandpapers. This machine has a new dustprotection system and integral dust collection that makes abrasives last longer. The ergonomic design with anti-slip surfaces and frontal handle makes the machine comfortable and efficient to

£235.00

view details

LRE46L - 23101104

High-performance orbital sander for polishing and finishing. Powerful and well-balanced, it allows the user to carry out high-quality work without the need for touching up. The PUR plate which comes as standard is virtually unbreakable. Mobile base for use with velcro sandpapers. This machine has a new dustprotection system and integral dust collection that makes abrasives last longer. The ergonomic design with anti-slip surfaces and frontal handle makes the machine comfortable and efficient to work with. Standard abrasives can be used. Includes

£132.48

view details

VS32 - 34105071

Technical Data..... Voltage: 400v, 50/60Hz or 230v Motor: 0,11Kw Roller width: 30mm Roller Diametre: 80mm Axles/Rollers: 3 Supension on rollers: 18mm Max working height: 150mm Feed speed forward/reverce 5-6, 5-11m/min Weight: 20Kg

£435.00

view details

FH71 - 29000051

Light, professional, powerful chamfering planer. Equipped with replaceable twin-use hard metal knives which do not require adjustment and it is also provided with dust collector connection.

£335.00

view details

BH80 - 29104301

Professional planer for convex or concave surfaces, with the possibility of working on flat surfaces. Ideal for shipyards, cooperage, carpentry and any other application requiring curved planing. It is lightweight and therefore useful for work in and out of the workshop. Includes replaceable twin-use hard metal knives which do not require adjustment and it is also provided with dust collector connection.

£405.00

view details

LR184H - 23101106

Multi sander LRT84H, orbital and rotary orbital, in one machine. Its ergonomic design makes it less tiring to use and the controls more easily accessible. Like the Orbital sander it includes an extra base with a delta shape for velcro sanding sheets, making it ideal for sanding difficult to reach surfaces such as frames, blinds etc. Like the rotary orbital it combines two movements (rotary and orbital) leaving totally smooth mark-free surfaces. It includes a disc for velcro sanding discs. Electronic speed control to choose the most suitable speed for the material. Brake system for the disc to prevent over-acceleration when not loaded. Integrated dust aspiration.

£185.00

view details

LR84H - 23000001

Light and powerful miniorbital sander for polishing and finishing. Its ergonomic design makes it less tiring to use and the controls more easily accessible. Includes an extra base with a delta shape for velcro sanding sheets, making it ideal for sanding difficult to reach surfaces such as frames, blinds etc. Integrated dust aspiration. Can be converted into a rotary orbital sander by using the optional disc. The LRE84H model has electronic speed control, which allows you to choose the speed most suited to the material.

£195.00

view details

LRE84H - 23000001

Multi sander LRT84H, orbital and rotary orbital, in one machine. Its ergonomic design makes it less tiring to use and the controls more easily accessible. Like the Orbital sander it includes an extra base with a delta shape for velcro sanding sheets, making it ideal for sanding difficult to reach surfaces such as frames, blinds etc. Like the rotary orbital it combines two movements (rotary and orbital) leaving totally smooth mark-free surfaces. It includes a disc for velcro sanding discs. Electronic speed control to choose the most suitable speed for the material. Brake system for the disc to prevent over-acceleration when not loaded. Integrated dust aspiration.

£185.00

view details

RTE146L - 23000002

High-performance rotary orbital sanders for high-quality polishing and finishing, ideal in situations where the surface is to be varnished or enamelled. Combines both rotary and orbital movements, leaving surfaces smooth and mark-free. Planing jobs are completed quickly. These sanders have a new dust-protection system and integral dust collection, allowing the use of standard abrasives and plates. The ergonomic design with anti-slip surfaces makes the machines comfortable and efficient to work with. Electronic speed control and plate-braking system, preventing no-load over-acceleration. This model has a 4 mm orbit, for fine and extra-fine sanding jobs, ideal for surfaces to be enamelled.

£235.00

view details

RT188N - 23101492

Ideal for sanding or polishing wooden or metal surfaces it is equipped with a powerful motor of 800 W with electronic speed adjustment. It is the most powerful rotary orbital sander in the market. Their big power and well balanced design allow a perfect sanding work with a low level of vibrations. The 7 mm orbit gives a high qualitysanding and combinated with the rotary orbital movement leave the surfaces smooth and mark free ready for vernishing or painting. The electronic speed adjustment allows to adjust the speed to the material to be sanded under the most ideal conditions. The RT188N is a professional machine equipped with an aluminium gear housing covered by a plastic cover and a nonslipping surface. It is also provided with a lateral handle it can be mounted on both sides. Equipped with a soft polyurethan sanding disc for velcro papers ideal for working on curved surfaces.

£335.00

view details

KFR130N - 21000071

Radius trimmer, for trimming edges of PVC and veneer. Equipped with a bit of r=3 mm with bearing. Optional bits are also available for several different radius. It allows to trimm the four sides of the board at once. Powerful motor (750 W) and electronic speed adjustmnet. Also equipped with electronic control maintaining the speed constant, independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 & 30 mm) for using with bits of different diameters.

view details

DF550 Vario - 21000031

Grooving machine specially designed for slotting wooden doors and windows, for installation of silicon insulating joints. Equipped with double point 3 mm. bit, two interchangeable bases, lateral fence, dust collector pipe and carrying case.

£452.00

view details

Z81 - 21102451

Light weight designed for several kind of jobs. Provides excellent finishing on laminate trimming. Very usefull for making mouldings, working with a high stability and precission. Ideal for making recesses for placing hinges with the Virutex special templates. Its big power allows it to make rabbets on doors or windows with the specific optional bit. Possibility to make right or circular slots in an easy and precise way with only the accessories included as standard equipment. The Z81 is equipped with a powerful motor and an electronic speed control, for adjusting the speed constant independently to the working load.

£300.00

view details

UC16K - 92103707

UC16K is designed for making frontal and lateral recesses for any kind of lock on doors and frames. Designed for use with Router FR66F , it is especially recommended for making recesses for locks that open with magnetic anti-panic cards and special opening devices. Its exclusive attachment system by means of clamp vises enables the user to mortise doors that have already been hung without damaging the surface. Secure, reliable grip. Works horizontally also. UC16K includes a height bar, making possible identical recesses on several doors at the same height, with no need to readjust the lock mortising template holder.

view details

FR98H - 210000000

Designed for shaping the edges of longitudinal beams and crossbeams and modelling coffered ceilings. Factory-fitted with straight blades for bevel-edging, ti also permits rounding or moulding of shapes by using the moulding blades included with the equipment or the optional blades set. The width of the straight or moulded profile obtained can be set between 0 and 40 mm. The guide on which the piece to be shaped rests can be moved with respect to the cutter, which means that different profiles can be made on an edge, according to the zone of the blade on which work is being done. There are two handles, one parallel to the main grip and at the same level, permitting comfortable work on longitudinal beams and vertical parts, and a top knob with two optional positions for work on horizontal surfaces, thus in both cases allowing a perfectly comfortable and secure two-handed grip on the machine. The machine is equipped with a smooth electronic starting system and safety connection cutt-off switch to avoid undesired start-up. It is also equipped with a dust collection nozzle.

£445.00

view details

FR66F - 21103652

Router for wood and plastic materials. High precision and stability when routing. Full control of the machine without releasing the handle. Rapid depth adjustment with three positions. Its powerful 1,100 W motor makes it specially suitable for hard, continuous jobs. Ideal for roughfacing edges, cutting knots, copy milling, dovetail assemblies (PL11 dovetailing attachment), making recesses for carpentry hardware, etc... Equipped with external dust collection connector.

view details

AB111C - 21098771

The jointing machine AB111C is specially designed for grooving panels in any position. Thanks to the design of its micrometric fence, which can be adjusted at any height and angle, and to a graphic signs it is not necessarry to take exact measurements, due that it is possible a lateral deplacement of 2 cm for adjusting the joint, once made the groove. A pre-adjusted stopper allows to select the different grooving depths fast and easy. The AB111n is equipped with a new 900 W motor with electronic control system which maintains the speed constant independently to the working load, allowing to make the grooves in a easy and precise way in all kind of woods. The machine can work usually on panels of 16, 19 and 22 mm thickness, but it is possible to work on thicker pieces thanks to the movable fence which allows to center perfectly the grooves. It is advisable to make three or more grooves to have stronger joints.

£320.00

view details

KS50 - 20100332

Its powerful motor (1,200 W) allow to cut up to 51 mm. depth, with cutting angle adjustable till 45°. Depth cutting and inclination are adjustable with micrometric scale. Equipped with riving knife, paralel guide, saw blade protection and safety against accidental start up. Provided with a dust collector connection.

£195.00

view details

KS90 - 20100333

The KS90 circular saw offers the professional exceptional performance features in terms of power, manageability and safety. It stands out from similar products on account of its solid, compact structure (which incorporates a gear box and saw blade protectors in aluminium) and its wide support base. You can make cuts of up to 70 mm, regulating both depth and angle. It includes a riving knife and saw blade protection. This meticulous design has a high ergonomic level. Also included is a large auxiliary handle that lets you work in absolutely safe conditions, with stability and comfort.

£255.00

view details

TS48L - 20107091

Tiltable mitre saw. Highly versatile-performing mitres, bevels and combination mitre cuts. With dust collector connection. Equipped with TCT saw blade 40 Z

£680.00

view details

TM43L - 20107101

Tiltable mitre saw. Highly versatile-performing mitres, bevels and combination mitre cuts. With upper table and dust collector connection. Equipped with TCT saw blade 40 Z

£400.89

view details

EM26D - 42000000

Gluing roller for gluing of larger surfaces with vinyl glue (white). It is contains a blocking switch for stopping the glue flow. Also includes a stand guaranteeing clear surface of the roller and working area. Lower roller width 125 mm Weight 2,1 kg

£61.41

view details

AS182K - 41000000

AS182 including extraction set - professional dry- / wet extraction system. Direct connection for all established power tools. Connection for auto mode. Voltage 230V,50/60 Hz Rated input 1.200 W Container Volume 72l. Extraction volume 170m/h Power outlet max.: 1.500 W Cable length 8m 230V,50/60 Hz

£275.00

view details

AS282K - 41000001

AS182 including extraction set - professional dry- / wet extraction system. Direct connection for all established power tools. Connection for auto mode. Voltage 230V,50/60 Hz Rated input 1.200 W Container Volume 72l. Extraction volume 170m/h Power outlet max.: 1.500 W Cable length 8m 230V,50/60 Hz

£355.00

view details

AS382L - 41000005

AS382L including extraction set - professional dry- / wet extraction system. Direct connection for all established power tools. Connection for auto mode. Voltage 230V,50/60 Hz Rated input 1.200 W Container Volume 72l. Extraction volume 170m/h Power outlet max.: 1.500 W Cable length 8m 230V,50/60 Hz

£455.00

view details

VS48 - 34106082

Technical Data..... Voltage: 400v, 50/60Hz Motor: 0,75Kw Roller width: 60mm Roller Diametre: 120x60mm Axles/Rollers: 4 Supension on rollers: 20mm Max working height: 220mm Feed speed forward/reverce 2-33m/min Horozontal bar length: 1050mm Weight: 70,75Kg

£844.00

view details

VS38K - 34106036

Technical Data..... Voltage: 400v, 50/60Hz Motor: 0,75Kw Roller width: 60mm Roller Diametre: 120x60mm Axles/Rollers: 3 Supension on rollers: 20mm Max working height: 220mm Feed speed forward/reverce 2-33m/min Weight: 75Kg

£880.00

view details

VS48K - 34106083

Technical Data..... Voltage: 400v, 50/60Hz Motor: 0,75Kw Roller width: 60mm Roller Diametre: 120x60mm Axles/Rollers: 4 Supension on rollers: 20mm Max working height: 220mm Feed speed forward/reverce 2-33m/min Weight: 70,75Kg

£996.00

view details

AP98 - 29104101

This is a special purpose planer for flushing work in the manufacture of furniture. It is ideal for flushing strips on edges. It is provided with a large support surface to allow easy and safe operation. The tool cuts accurately and is easily adjustable. The support base is height-adjustable with respect to the cutting plane of the knife-holder. Thanks to its high power rating (1050 W) it can be operated without risk of mechanical fatigue. It is provided with replaceable twin-use hard metal knives which do not require adjustment and it is also provided with dust collector connection.

£599.00

view details

FR117N - 21000026

Specially designed for trimming on the corners on the polishing of solid wood parquet or stairs. It allows to trim the corners, where the traditional parquet sanders cannot arrive, leaving them at same level than the rest of the floor. Machine equipped with frontal protector avoiding damages to the skirting or any other wall elements. Includes a dust collection nozzle for connecting to an external dust collector.

£420.00

view details

CR94D - 21000032

This trimmer is specially designed for slotting doors and windows. Allows insulating joints to be placed without removing the fittings. Ideal for fitting WEGOMA PVC and rubber joints.

£305.00

view details

OF850 - 21103631

Surface routers for routing wood and plastic. Ideal for deburring edges, cutting out knots, copy routing, trimming, constructing frames and tooling, etc. Equipped with external dust collection connector. High precision and stability during routing

view details

OF850E - 21109651

Surface routers for routing wood and plastic. Ideal for deburring edges, cutting out knots, copy routing, trimming, constructing frames and tooling, etc. Equipped with external dust collection connector. Includes electronic speed control. High precision and stability during routing

view details

TS33L - 20107081

High precision portable tiltable mitre saw. Big cutting capacity, up to 160x95 mm or 200x45 m. Head can be tilted from 0° to 45°. Integral safety system. Connection for external dust collection. Includes shut-off button for easy change of saw disc. Equipped with TCT saw blade 48Z. No noise form gears: belt transmission with safety tension.

£710.00

view details

TM33L - 20107071

High precision portable tiltable mitre saw. Big cutting capacity, up to 160x95 mm or 200x45 m. Head can be tilted from 0° to 45°. Equipped with upper table. Integral safety system. Connection for external dust collection. Includes shut-off button for easy change of saw disc. Equipped with TCT saw blade 48Z. No noise form gears: belt transmission with safety tension.

£410.55

view details

EB70P - 52000006

The EP70P door lifter is ideal for taking out heavy or light doors in an easy way. It allows to lift heavy doors like armored doors or fire doors. Its design allows to turn the tool to both sides, making easier the extraction of the door. Furthermore the frontal part is adjustable helping a lot the task of placing the door. The adjustable frontal platform allows a precise work and is covered by a special material against possible scratches. Easily transportable due to its light weight (1 kg)

£65.00

view details

Multiplex Design Beech Light/ Dark - E.BEECH/M/TYP/1

Made from real beech veneer. Striped: Fine On thick edges lower layers are made from steamed Beech veneer or from Maple respectivily Birch veneer. These edges content only horizontal layers which guarantees easy milling. 0,6mm - 3,0mm in coils Dovetail joints are invisible for further information please refer to thick veneer edges respectively veneer edges with support.

view details

Multiplex Design Beech Light/ Dark - E.BEECH/M/TYP/2

Made from real beech veneer. Striped: Rough On thick edges lower layers are made from steamed Beech veneer or from Maple respectivily Birch veneer. These edges content only horizontal layers which guarantees easy milling. 0,6mm - 3,0mm in coils Dovetail joints are invisible for further information please refer to thick veneer edges respectively veneer edges with support.

view details

Multiplex Design Beech/ Maple - E.BEECH/M/TYP/7

Made from real beech and maple veneer. Striped: Middle On thick edges lower layers are made from steamed Beech veneer or from Maple respectivily Birch veneer. These edges content only horizontal layers which guarantees easy milling. 0,6mm - 3,0mm in coils Dovetail joints are invisible for further information please refer to thick veneer edges respectively veneer edges with support.

view details

Kleiberit 303 28Kgs - G.PVA.303.28

Kleiberit PVA Glue 303 28Kg Tub

£68.50

view details

Endgrained Edge Beech - E.BEECH/M/HH031

Wood types: Oak, Beech, Euro. Maple, am. Walnut, Euro. Cherry All egdes are sanded and coated on the back with ZL-special lamination. Thickness: 1,2mm one layer Roll lengths: 50&100metres Internal diameter: 400mm External diameter: <600mm

view details

AG98-Set - 29101751

For attaching hot-melt adhesive coated edges made of plastics, veneer etc. It is applicable for straight and curved workpieces. Infinitely variable guide jaws with material sparing slide protection coating for edge veneer up to 50 mm width and 1,2 mm thickness. Large adjustable latitudes of decoiler. Robust construction made of aluminium diecasting. Straight or curved workpieces can be quickly foiled flush and overlapping. The edge trimmer AU93 trimms both edges simultaneously. For edges up to 40 mm width. For wider edges the trimmer can be disassembled and each half can be used on its own. The KG94 trimms the belt with a clear cut. It is suitable for trimming PVC, melamine, polyester, veneer etc., max. 1,2 mm wide. Delivery: professional system, containing glue-on edge AG98, edge trimmer AU93, edge banding device KG94 and rebate fence, in a safe styrofoam insert block.

£414.00

view details

Multiplex Design Beech Light/ Dark - E.BEECH/M/TYP17

Made from stained veneer, imitation beech Striped: Fine On thick edges lower layers are made from steamed Beech veneer or from Maple respectivily Birch veneer. These edges content only horizontal layers which guarantees easy milling. 0,6mm - 3,0mm in coils Dovetail joints are invisible for further information please refer to thick veneer edges respectively veneer edges with support.

view details

Multiplex Design Birch Light/ Dark - EBIRCH/M/T11

Made from stained veneer, imitation birch Striped: light On thick edges lower layers are made from steamed Beech veneer or from Maple respectivily Birch veneer. These edges content only horizontal layers which guarantees easy milling. 0,6mm - 3,0mm in coils Dovetail joints are ivisible for further information please refer to thick veneer edges respectively veneer edges with support.

view details

Engrained Edge Euro. Maple - E.EURO/M/HH025

Wood types: Oak, Beech, Euro. Maple, am. Walnut, Euro. Cherry All egdes are sanded and coated on the back with ZL-special lamination. Thickness: 1,2mm one layer Roll lengths: 50&100metres Internal diameter: 400mm External diameter: <600mm

view details

3-Ply Wooden Edges Euro.Maple - EMAPLE/DS080025

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 23mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

3-Ply wooden Edges Euro. Cherry - ECHERRYDS080019

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 23mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

3-Ply Wooden Edges Alder - EALDERDS080057

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 23mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

5-Ply wooden Edges Euro. Maple - EMAPLE/FS030025

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 33mm & 43mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

5-Ply Wooden edges Euro. Cherry - ECHERRYFS030019

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 33mm & 43mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

5-Ply Wooden Edges Euro.Walnut - EWALNUTFS030016

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 33mm & 43mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

5-Ply Wooden Edges Oak - E.OAK/FS030050

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 33mm & 43mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

Multiplex Design Mahogany/ Maple Through and Through - EMAPLE/MMP12205

Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

Multiplex Design Mahogany/ Maple Through and Through - EMAPLEMMP122025

Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

Real-Multiplex Birch Through and Through - EBIRCHMMP023029

Real-Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm Beech: 2500mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

Real-Multiplex Birch Through and Through Doubled With 2 x 4 mm Birch Veneer - EBIRCHMP027029

Real-Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm Beech: 2500mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

Re Saw feed unit with roller - VS28

view details

Double edge trimmer AU93 - AU93

Cuts both sides simultaneously. For edgeds up to 40 mm. For larger cuts it can be used as two independent edge trimmers. Top quality long life blades which are easy to replace.

£25.00

view details

Edgecutter KG30G - KG30G

For trimming PVC, melamine, Polyester, veneer, ets. up to 3 mm thickness.

£125.00

view details

End Trimmer KG94 - KG94

Mackes a perfect, clean and high quality cut on al the corners of the board. Equiped with twin use blades. For trimming PCV, melamine, Polyester, vereer, ect. up to 0,6 mm thickness.

£34.00

view details

Double Cutting Machine DS100 - DS100

£8,900.00

view details

Air pressure vacuum clamp DVS-G - basic module with pneumatic vacuum-pump - DVS-G

For comfortable and safe work at the edge or on the surface, e.g. gluing and trimming of edges. Clamping of solid wood is possible as well. Horizontal and vertical clamping is possible.

Included in delivery
External compressed air connection, pneumatic pump, air bleed valve, additional valve für connection of a additional clamping device

£330.00

view details

Air pressure vacuum clamp DVS-A w/o pneumatic vacuum-pump - only as add-on part for DVS-G - DVS-A

Addition clamping device for DVS-G.

£195.00

view details

Electric vacuum clamp EVS-S Set, containing 1x EVS-G with electric pump, 1x EVS-A w/o electric pump - EVS-S Set

Electric vacuum-pump with additional valve für connection of additional clamping device.

£645.00

view details

Electric vacuum clamping system EVS-G - EVS-G

Electric vacuum-pump with additional valve für connection of additional clamping device.

£450.00

view details

Electric vacuum clamp EVS-A w/o electric vacuum-pump - only as add-on part for EVS-G - EVS-A

Addition clamping device for EVS-G.

£195.00

view details

Picasso 1 - Pi 1

Free standinding Pellet burning stove in red & black.

£2,000.00

view details

Variomatic3N - 34000052

Technical Data..... Voltage: 400v, 50/60Hz Motor: 0,55Kw Roller width: 2x25mm Roller Diametre: 120x25mm Axles/Rollers: 3/4 Supension on rollers: 138/144mm Max working height: 220mm Feed speed forward/reverce 2-24m/min Weight: 75/87Kg

£1,420.60

view details

Variomatic4N - 34000054

Technical Data..... Voltage: 400v, 50/60Hz Motor: 0,55Kw Roller width: 2x25mm Roller Diametre: 120x25mm Axles/Rollers: 3/4 Supension on rollers: 138/144mm Max working height: 220mm Feed speed forward/reverce 2-24m/min Weight: 75/87Kg

£1,579.10

view details

Multiplex Design Birch Light/ Dark - E.BIRCH/M/TYP12

Made from stained veneer, imitation birch. Striped: dark On thick edges lower layers are made from steamed Beech veneer or from Maple respectivily Birch veneer. These edges content only horizontal layers which guarantees easy milling. 0,6mm - 3,0mm in coils Dovetail joints are ivisible for further information please refer to thick veneer edges respectively veneer edges with support.

view details

Endgrained Edge Oak - EWALNUT/M/HH05

Wood types: Oak, Beech, Euro. Maple, am. Walnut, Euro. Cherry All egdes are sanded and coated on the back with ZL-special lamination. Thickness: 1,2mm one layer Roll lengths: 50&100metres Internal diameter: 400mm External diameter: <600mm

view details

Endgrained Edge Oak - E.OAK/M/HH050

Wood types: Oak, Beech, Euro. Maple, am. Walnut, Euro. Cherry All egdes are sanded and coated on the back with ZL-special lamination. Thickness: 1,2mm one layer Roll lengths: 50&100metres Internal diameter: 400mm External diameter: <600mm

view details

3-Ply Wooden Edges Oak - EOAK/DS080050

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 23mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

5-Ply Wooden Edges Pear Tree - EP.T/FS030035

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 33mm & 43mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

7-Ply Wooden Edge Beech - EBEECH/MS070031

Wood types: Beech other wood types on demand. Width: 63mm Length: 3000mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

Real-Multiplex Beech Through And Through - EBEECHMP023031

Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm beech: 2500mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

Edgecutter For Ciricular Tables KG20R - KG20R

Edgecutter for exact cutting of tapes on round workpieces.

£125.00

view details

Air pressure vacuum clamping System DVS-S Set, containing 1x DVS-G with pneumatic pump, 1x DVS-A w/o pneumatic pump - DVS-S

For comfortable and safe work at the edge or on the surface, e.g. gluing and trimming of edges. Clamping of solid wood is possible as well.
Horizontal and vertical clamping is possible.

Included in delivery
DVS-G with external compressed air connection, pneumatic pump, air bleed valve, additional valve für connection of a additional clamping device and DVS-A additional clamping device.

£490.00

view details

Matisse Grey - MG 01

£2,000.00

view details

- SCM Record 100

view details

- Homag BAZ

view details

EH80R - 29104302

Highly useful, fast ajd effective in sanding and stripping paints, varnishes and resins, particularly on large flat surfaces. It allows sanding and shaving with a superb finishing, evan on delicate or brittle materials they can be damaged or splintered by a standard planer. Equipped with dust collection nozzle.

£420.80

view details

EH80R - 29104302

Professional abrasive roller planer for convex or concave surfaces, with the possibility of working on flat surfaces. Ideal for shipyards, cooperage, carpentry and any other application requiring curved planing. It is lightweight and therefore useful for work in and out of the workshop.

£420.20

view details

KH-70 - 42000007

The fastening block enables clamping of doors and other workpieces that are max. 70mm thick. In this way you don’t need to hold the workpiece, which makes your work convenient and easy.The workpiece is additionally clamped through its own weight. Base 600x270 mm Total height 350mm Weight 7 Kg

£120.00

view details

EM25D - 42000001

Gluing roller for gluing of larger surfaces with vinyl glue (white). It is contains a blocking switch for stopping the glue flow. Also includes a stand guaranteeing clear surface of the roller and working area. The EM25D is also provided with an upper roller. Upper roller width (EM25D)95 mm Lower roller width 125 mm Weight 2,1 kg

£64.86

view details

SPECIAL OFFER PRICE £1700 - PM2000

The PM2000 is an innovative one man hand operated hot melt shaped edgebanding machine, which completely revolutionises the process of applying edging material to a variety of shaped or straight edges. The machine is fitted with a glue pot which applies glue directly to the material via a screw fed glue roller. The heat up time of the glue pot is approximately 6 minutes.

£1,700.00

view details

Band saw feeder VS26 - VS26

Suitable for band saws with diameter of 400 - 700 mm. The lightest saw band feed device in the world. It is applicable up to the max. passage of 200 mm. The interval from the band saw to the stop 100mm. From feed device roller to the saw max 100mm. Adjustable roller surface pressure. Feeding stop is scaleable.

£612.00

view details

Edgecutter KG30/60 - KG30/60

The edgecutter KG30/60 is designed for an edge height of up to 50 mm and an edge thickness of 3 mm. It enables precise angular cuttings up to 60°. Even with ABS edges no disforming of the material will occur.

£175.00

view details

Holztech SK-48 - Holztech

Technical data
number of rubber coated feeding rollers	4
diameter of rubber coated feeding rollers	120 mm
width of rubber coated feeding rollers	60 mm
number of speeds (2-speed motor & 2 sets gear wheels)	3,5/5/7/10/12,5/16/25/32 m/min
General
motor (Hp)	1
weight	61 kg

Standard equipment
Options
•	3-phase 3x230V/50Hz

£700.00

view details

RTE46L - 23000003

High-performance rotary orbital sanders for high-quality polishing and finishing, ideal in situations where the surface is to be varnished or enamelled. Combines both rotary and orbital movements, leaving surfaces smooth and mark-free. Planing jobs are completed quickly. These sanders have a new dust-protection system and integral dust collection, allowing the use of standard abrasives and plates. The ergonomic design with anti-slip surfaces makes the machines comfortable and efficient to work with. Electronic speed control and plate-braking system, preventing no-load over-acceleration. This model has a 7 mm orbit, for medium to fine-grade sanding jobs, with a greater capacity for rectification.

£235.00

view details

KFR130N - 21000021

Radius trimmer, for trimming edges of PVC and veneer. Equipped with a bit of r=3 mm with bearing. Optional bits are also available for several different radius. It allows to trimm the four sides of the board at once. Powerful motor (750 W) and electronic speed adjustmnet. Also equipped with electronic control maintaining the speed constant, independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 & 30 mm) for using with bits of different diameters.

£300.00

view details

FC16S - 21000004

Specially designed for quick, precise mortising on doors or other elements, either at the work site or in the workshop. Its special fixing system allows the mortising of doors that have already been hung, without damaging the surface. Its quick measurement adjustment permits multiple mortises to be made in record time. Also able to work horizontally. For mortising grooved doors or those with overlap, there is an adjustment system to centre the machine. Optional bits are lowcost and easily inter-changeable, as they use the same tool-holding shaft. Equipped from factory with hard metal lock mortiser bit Ø 15 mm, locking bar to make mortises on several doors at the same height, rubber protectors for delicate jobs, service keys and dust collector connection.

£860.00

view details

SC134L - 29000062

Jig saw with electronic speed control and pendular mouvement regulation (4 positions). Quick system for changing the saw blade without any tool. Tiltable base from 0º to 45º. Equipped with antisplinter cutting guide, flying chips protector, metal carrying case and dust collector connection. Model with full handle, for single hand working.

£235.00

view details

SC234L - 29000063

Jig saw with electronic speed control and pendular mouvement regulation (4 positions). Quick system for changing the saw blade without any tool. Tiltable base from 0º to 45º. Equipped with antisplinter cutting guide, flying chips protector, metal carrying case and dust collector connection. Model with frontal knob.

£235.00

view details

RZ170N - 20100335

Specially designed for cutting doors, door frames, base boards and skirtings, it is ideal for installers of parquet or such other floor coverings as carpets, ceramic, etc... Equipped with a powerful motor it provides a clean and precise cut easily and quickly. The cutting height and depth are adjustable by means of its milimetric gauges. Its cutting depth allows to cut the doors at once. The new RZ170N is equipped with a new motor of 900 W and an electronic speed control, for adjusting the speed to the material to be cut. It is also equiped with an electronic system which maintains the speed constant independently to the working load. Includes dust collection nozzle and pipe for connection to an external dust collector.

£545.00

view details

MT58K - 95000001

Height adjustable, transportable and folding, the MT58K gives a solid working surface where is possible to fix the machine. It can be moved and folded with the machine fixed on it, avoiding to fix and take out the machine continuously.

£255.00

view details

AG98-SET - 2901751

For attaching hot-melt adhesive coated edges made of plastics, veneer etc. It is applicable for straight and curved workpieces. Infinitely variable guide jaws with material sparing slide protection coating for edge veneer up to 50 mm width and 1,2 mm thickness. Large adjustable latitudes of decoiler. Robust construction made of aluminium diecasting. Straight or curved workpieces can be quickly foiled flush and overlapping. The edge trimmer AU93 trimms both edges simultaneously. For edges up to 40 mm width. For wider edges the trimmer can be disassembled and each half can be used on its own. The KG94 trimms the belt with a clear cut. It is suitable for trimming PVC, melamine, polyester, veneer etc., max. 1,2 mm wide. Delivery: professional system, containing glue-on edge AG98, edge trimmer AU93, edge banding device KG94 and rebate fence, in a safe styrofoam insert block. Voltage 230V, 50/60 Hz Power 1.500 W Max. edge width 50 mm Temperature I: 300°C, II: 525°C Max. edge thickness 1,2 mm Weight 2,7 kg

£265.65

view details

Engrained Edge Euro. Cherry - ECHERRY/M/HH019

Wood types: Oak, Beech, Euro. Maple, am. Walnut, Euro. Cherry All egdes are sanded and coated on the back with ZL-special lamination. Thickness: 1,2mm one layer Roll lengths: 50&100metres Internal diameter: 400mm External diameter: <600mm

view details

Portable hotmelt edgebander PORTAMASTER PM2000-T - PM2000T

The PM2000 is an innovative one man hand operated hot melt edgebanding machine which revolutionises the process of applying edging material to a variety of shaped and straight workpieces.

PM2000T is it the model with digital temperature control

£2,200.00

view details

Portable hotmelt edgebander PORTAMASTER PM2000TS - PM2000TS

The PM2000 is an innovative one man hand operated hot melt edgebanding machine which revolutionises the process of applying edging material to a variety of shaped and straight workpieces.

PM2000-TS is the model with digital temperature and with speed control

£2,200.00

view details

Edgecutter KG30 - KG30

For trimming PVC, melamine, Polyester, veneer, ets. up to 3 mm thickness (1,5 mm x 45 mm x 3 mm x 25 mm). Equiped with adusting system for the cutting position.

£50.00

view details

Uniwood Hot Melt 674.4 - HM.674.4

Uniwood Hot Melt Glue 674.4 Bag

£48.00

view details

3-Ply wooden Edges Beech - EBEECH/DS080031

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 23mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

3-Ply Wooden Edges Birch - EBIRCH/DS080029

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 23mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

5-Ply Wooden Egdes Beech - EBEECH.FS030031

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 33mm & 43mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

Multiplex Design Beech/Maple Through and Through - EBEECHMP107099

Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

Multiplex Design Mape/Walnut through and Through - EMAPLEMP102025

Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

3-Ply Wooden Edges Euro. Walnut - EWALNUTDS080016

Wood types: Beech, Euro. Maple, Euro. cherry, Alder, Euro. Walnut, Oak, Birch other wood types on demand. Width: 23mm Length: 4300mm Standard thickness: 2,65mm other thicknesses and lengths on demand all edges are calibrated and sanded packed in retal wooden cases.

view details

Real-Multiplex Birch Through and Through Doubled with 2 x 4mm Beech Veneer - EBIRCHMP025029

Real-Multiplex all strips are horizontal sanded and calibrated other wood types on demand Width: 105mm Length: 4000mm Beech: 2500mm Standard thickness: 2,65mm other thicknesses and lengths on demand.

view details

TKS 315S - Holzmann

• quick and easy assembly, machine is partly pre-assembled
• precise and step less height and angle adjustment (up to 45°) of the saw blade
• table extension (550x800mm) mountable at the front- and backside
• tables galvanized, powder coated painting
• ball bearing sliding table, miter fence and moving device included in delivery

£577.20

view details

91A6500 - Blum Hinges

180 degree screw fix hinge

£2.20

view details

180 Degree - 91A6500

soft closing hinge

£2.00

view details

Tandem - Blum Tandem Box

£15.00

view details